Single row INSOCOAT cylindrical roller bearings are designed to prevent electrical current from passing through the bearing and achieve exceptional quality by applying a complex plasma spray process.

Single row Hybrid deep groove ball bearings have rings made of bearing steel and rolling elements made of bearing quality silicon nitride (Si3N4).

Self-aligning ball bearings are two raceways of the inner ring and raceway for the spherical surface of the outer ring, assembled with spherical ball bearings.

Single row Hybrid cylindrical roller bearings are a type of roller bearing that is subjected to radial forces only. Roller bearings are a type of SKF rolling bearing and are one of the most widely used components in modern machinery.

SKF Backing bearings are rolling bearings with a particularly thick outer ring, which are mounted in groups on a stationary shaft as support rollers when in use.

SKF roller bearing units are rugged, ready-to-use units that are factory assembled, lubricated and sealed for maximum service life.

Roller bearing pillow block units consist of spherical or tapered roller bearings mounted in non-dissecting housings that can be bolted to the supporting surface.

A bearing housing is a product used primarily for securely mounting bearings, where the outer ring is usually stationary and the inner ring can be rotated.

Flange bearing is a motion system that can be used without the use of bearing base, it is very popular in the application because of its light weight and low cost.

The outer ring of drawn cup needle roller bearings is precision stamped with thin steel plates, and has a small structural space and a large load capacity. Suitable for the installation space is limited and the shell hole is not suitable for the occasion of the raceway.

Thrust Cylindrical Roller Bearing for bearing axial heavy load configuration, not easily affected by shock load, rigid, axial installation space is small, mainly used in thrust ball bearing load bearing capacity is insufficient conditions.

Single Row Deep Groove Ball Bearing is the most representative structure of rolling bearings, single row deep groove ball bearings located in the inner ring, outer ring on the raceway.

NTN's various bearing products are produced with high precision processing and testing technology of 0.01 microns.

Double row spherical roller bearing has double row roller, outer ring has a common spherical raceway, inner ring has two raceways and relative to the bearing axis tilt into an angle.

The design of double row deep groove ball bearing is basically the same as single row deep groove ball bearing, the deep groove ball shaft shaped raceway plus the raceway and steel ball have excellent fit between.

Double row self aligning ball bearings are two raceways of the inner ring and the raceway for the spherical surface of the outer ring between, assembled with a round spherical ball bearing, its characteristic is two rows or two rows of ball outer ring has a common spherical track.